Difference between revisions of "Openwrt"
From Steak Wiki
Jump to navigationJump to search| Line 31: | Line 31: | ||
option name reservedipcomputer}} | option name reservedipcomputer}} | ||
ref: https://openwrt.org/docs/guide-user/base-system/dhcp_configuration#static_leases | ref: https://openwrt.org/docs/guide-user/base-system/dhcp_configuration#static_leases | ||
| + | |||
| + | I tried to add this to the wiki, but someone (https://openwrt.org/docs/guide-user/base-system/dhcp_configuration?rev=1596434574) decided to replace my simple solution with an obfuscated one that requires uci commands. So instead, it will remain here. | ||
Revision as of 02:44, 9 August 2020
Tips
port forwarding
Port forwarding is two steps:
- redirect port from outside to internal (NAT)
- allow access from outside to inside via this port (firewall)
Contents of /etc/config/firewall
config redirect
option name 'PassthroughformyServer'
option src 'wan'
option proto 'tcp'
option src_dport '80'
option dest_ip '192.168.1.100'
option dest_port '80'
option target 'DNAT'
option dest 'lan'
config rule
option src 'wan'
option proto 'tcp'
option dest_port '80'
option target 'ACCEPT'
Note: Proto can be 'tcp' OR 'tcpudp' OR 'udp'
reserved ip / static lease
Contents of /etc/config/dhcp
config host
option ip 192.168.1.122
option mac c2:44:32:18:cd:ab
option name reservedipcomputer
ref: https://openwrt.org/docs/guide-user/base-system/dhcp_configuration#static_leases
I tried to add this to the wiki, but someone (https://openwrt.org/docs/guide-user/base-system/dhcp_configuration?rev=1596434574) decided to replace my simple solution with an obfuscated one that requires uci commands. So instead, it will remain here.
