Difference between revisions of "Parallax Propeller on Linux w/SimpleIDE"
| (7 intermediate revisions by the same user not shown) | |||
| Line 2: | Line 2: | ||
==Propeller and Linux Traps== | ==Propeller and Linux Traps== | ||
| − | So, you come from the RPI world, and | + | So, you come from the RPI world, or run FOSS, and want to use the P2 on Linux. Great. But, a warning: There are a lot of dead ends in Propeller world. The quick answer to get it working is do the following: |
# Use Debian Buster (possibly stretch or jessie) | # Use Debian Buster (possibly stretch or jessie) | ||
| − | # Use the PropellerGCC website here: https://www.sites.google.com/site/propellergcc/ | + | # Use the PropellerGCC website here: https://www.sites.google.com/site/propellergcc/ http://web.archive.org/web/20201009074325/https://sites.google.com/site/propellergcc/downloads/linux-downloads |
| − | # Download the .deb package. | + | # Download the .deb package. (backup: https://archive.org/details/simpleide-0.9.66-amd64-debian-linux) |
# Install with gdebi (if you don't know what that is, look it up) | # Install with gdebi (if you don't know what that is, look it up) | ||
# Load simpleide, and expand the 2nd / 3rd panes by clicking the icon on the bottom left | # Load simpleide, and expand the 2nd / 3rd panes by clicking the icon on the bottom left | ||
# Choose generic board | # Choose generic board | ||
| − | # Connect to the board with an FTDI - USB adapter, or the propeller prop (I used a standard FTDI cable, and it worked | + | # Connect to the board with an FTDI - USB adapter, or the propeller prop (I used a standard FTDI cable, and it worked) |
# At least on the Mini, RX and TX are swapped. I shit you not. RX on the FTDI goes to RX on the Mini. Don't ask me why this was done. | # At least on the Mini, RX and TX are swapped. I shit you not. RX on the FTDI goes to RX on the Mini. Don't ask me why this was done. | ||
# DTS on FTDI connects to RESET on mini. Mini is powered by 6.5-12V+. FTDI RX/TX is 3.3V. | # DTS on FTDI connects to RESET on mini. Mini is powered by 6.5-12V+. FTDI RX/TX is 3.3V. | ||
# Should "just work" | # Should "just work" | ||
| − | That's the tl;dr. Now for what | + | That's the tl;dr. Now for what did NOT work for me. |
===2020/12 - Recent SimpleIDE does not work easily=== | ===2020/12 - Recent SimpleIDE does not work easily=== | ||
| Line 23: | Line 23: | ||
| − | === | + | ===PropWare - Dead Links fixed=== |
| − | Go to the forums. There is a reasonable thread on Linux support here: https://forums.parallax.com/discussion/166656/simpleide-on-linux | + | Go to the forums for most up to date instructions. There is a reasonable thread on Linux support here: https://forums.parallax.com/discussion/166656/simpleide-on-linux |
| − | + | Link: https://david.zemon.name/PropWare/#/about | |
| − | + | Links were dead, but 'should' be fixed now. | |
| − | PropWare, | + | |
| + | He has a github here: https://github.com/parallaxinc/PropWare which lacks current releases. So you are stuck using his website for recent releases. | ||
| + | |||
| + | PropWare, currently replaces your packages (deb) cmake, which means if you use cmake, you may later get confused. There is a ticket, and I imagine it's a WIP. I tried compiling v2.1.0 for PropWare without luck. | ||
| + | |||
===2020/12 - Catalina: Source Build Required=== | ===2020/12 - Catalina: Source Build Required=== | ||
Catalina is another option, but for Linux you are shoehorned into source build only. That would be ok, if the dependencies were reasonable, but after trying all of the above for 2-3 hours, then getting here, I was not in the mood for another rabbit hole. | Catalina is another option, but for Linux you are shoehorned into source build only. That would be ok, if the dependencies were reasonable, but after trying all of the above for 2-3 hours, then getting here, I was not in the mood for another rabbit hole. | ||
| Line 36: | Line 40: | ||
Upon first glance, you will see that Propeller is OSHW, and fully released. You might assume that favor towards OSHW would extend to FOSS. Yes and no. Yes, it can work on Linux, but no the company is not necessarily as gung-ho about FOSS as it is OSHW. | Upon first glance, you will see that Propeller is OSHW, and fully released. You might assume that favor towards OSHW would extend to FOSS. Yes and no. Yes, it can work on Linux, but no the company is not necessarily as gung-ho about FOSS as it is OSHW. | ||
| − | It's walking a tightrope walk to get the propeller to work on GNULinux machines. But, it does and can work. Just be aware that there are a lot of unmaintained dead ends, if you | + | It's walking a tightrope walk to get the propeller to work on GNULinux machines. But, it does and can work. Just be aware that there are a lot of unmaintained dead ends, if you tread down this path. |
| + | |||
| + | ==Todo== | ||
| + | Get together the parallax data sheets and application notes and make a book. | ||
Latest revision as of 05:29, 19 February 2021
I recently got an issue of Nuts and Volts Electronics magazine to find the first article mentioning the Parallax Propeller 2. What is the Propeller, and why would I want it? The propeller is like a microcontroller/Arduino, and it is like an FPGA. It has 8 cores (P2) which can operate independently. In a perfect world, this means you have 8 microcontrollers on one chip.
Propeller and Linux Traps
So, you come from the RPI world, or run FOSS, and want to use the P2 on Linux. Great. But, a warning: There are a lot of dead ends in Propeller world. The quick answer to get it working is do the following:
- Use Debian Buster (possibly stretch or jessie)
- Use the PropellerGCC website here: https://www.sites.google.com/site/propellergcc/ http://web.archive.org/web/20201009074325/https://sites.google.com/site/propellergcc/downloads/linux-downloads
- Download the .deb package. (backup: https://archive.org/details/simpleide-0.9.66-amd64-debian-linux)
- Install with gdebi (if you don't know what that is, look it up)
- Load simpleide, and expand the 2nd / 3rd panes by clicking the icon on the bottom left
- Choose generic board
- Connect to the board with an FTDI - USB adapter, or the propeller prop (I used a standard FTDI cable, and it worked)
- At least on the Mini, RX and TX are swapped. I shit you not. RX on the FTDI goes to RX on the Mini. Don't ask me why this was done.
- DTS on FTDI connects to RESET on mini. Mini is powered by 6.5-12V+. FTDI RX/TX is 3.3V.
- Should "just work"
That's the tl;dr. Now for what did NOT work for me.
2020/12 - Recent SimpleIDE does not work easily
SimpleIDE as of 2020 does not ship .deb packages. You must compile. Instant red flag. If you examine the install instructions for Linux, you will find that it refers to a non-existent .deb file. The documentation is outdated. Red flag no. 2.
Even the official website tells you its supported, which is false. The install instructions in the git are out of date, and reference a non existent .deb. Ref: http://web.archive.org/web/20200805021922/http://learn.parallax.com/tutorials/language/propeller-c/propeller-c-set-simpleide/linux http://web.archive.org/web/20200929084400/https://learn.parallax.com/tutorials/language/propeller-c/propeller-c-set-simpleide/raspberry-pi
PropWare - Dead Links fixed
Go to the forums for most up to date instructions. There is a reasonable thread on Linux support here: https://forums.parallax.com/discussion/166656/simpleide-on-linux Link: https://david.zemon.name/PropWare/#/about Links were dead, but 'should' be fixed now.
He has a github here: https://github.com/parallaxinc/PropWare which lacks current releases. So you are stuck using his website for recent releases.
PropWare, currently replaces your packages (deb) cmake, which means if you use cmake, you may later get confused. There is a ticket, and I imagine it's a WIP. I tried compiling v2.1.0 for PropWare without luck.
2020/12 - Catalina: Source Build Required
Catalina is another option, but for Linux you are shoehorned into source build only. That would be ok, if the dependencies were reasonable, but after trying all of the above for 2-3 hours, then getting here, I was not in the mood for another rabbit hole.
The only difficult dependency of Catalina appears to be wxGTK, which is advised in the install instructions are requiring a build from source.
Conclusion
Upon first glance, you will see that Propeller is OSHW, and fully released. You might assume that favor towards OSHW would extend to FOSS. Yes and no. Yes, it can work on Linux, but no the company is not necessarily as gung-ho about FOSS as it is OSHW.
It's walking a tightrope walk to get the propeller to work on GNULinux machines. But, it does and can work. Just be aware that there are a lot of unmaintained dead ends, if you tread down this path.
Todo
Get together the parallax data sheets and application notes and make a book.
