Difference between revisions of "Beaglebone"
(Created page with "==PocketBeagle== Connected via usb. Opens up cloud9 IDE, and gives you a web server connected arduino like interface to program the AM355x CPU. ===GNU\Linux Sharing internet...") |
|||
| Line 3: | Line 3: | ||
===GNU\Linux Sharing internet with Pocketbeagle over USB=== | ===GNU\Linux Sharing internet with Pocketbeagle over USB=== | ||
| − | Had some trouble with this today. This guide: https://elementztechblog.wordpress.com/2014/12/22/sharing-internet-using-network-over-usb-in-beaglebone-black/ does NOT work. These guides are also | + | Had some trouble with this today. This guide: https://elementztechblog.wordpress.com/2014/12/22/sharing-internet-using-network-over-usb-in-beaglebone-black/ does NOT work. These guides are also no good: https://unix.stackexchange.com/questions/520528/sharing-internet-using-network-over-usb-in-raspberry-zero-based-on-beaglebone |
You don't need to setup a bridge. It might work that way, but its not required. What works is the following: | You don't need to setup a bridge. It might work that way, but its not required. What works is the following: | ||
| Line 24: | Line 24: | ||
net.ipv4.ip_forward=1 | net.ipv4.ip_forward=1 | ||
| − | |||
| − | |||
Afterwards it is advisable to double-check forwarding is enabled as required after a reboot. | Afterwards it is advisable to double-check forwarding is enabled as required after a reboot. | ||
| Line 31: | Line 29: | ||
With iptables | With iptables | ||
| − | # iptables -t nat -A POSTROUTING -o | + | # iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE |
# iptables -A FORWARD -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT | # iptables -A FORWARD -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT | ||
| − | # iptables -A FORWARD -i | + | # iptables -A FORWARD -i usb0 -o eth0 -j ACCEPT |
</pre> | </pre> | ||
Revision as of 02:15, 11 March 2020
PocketBeagle
Connected via usb. Opens up cloud9 IDE, and gives you a web server connected arduino like interface to program the AM355x CPU.
GNU\Linux Sharing internet with Pocketbeagle over USB
Had some trouble with this today. This guide: https://elementztechblog.wordpress.com/2014/12/22/sharing-internet-using-network-over-usb-in-beaglebone-black/ does NOT work. These guides are also no good: https://unix.stackexchange.com/questions/520528/sharing-internet-using-network-over-usb-in-raspberry-zero-based-on-beaglebone
You don't need to setup a bridge. It might work that way, but its not required. What works is the following:
Enable packet forwarding Check the current packet forwarding settings: # sysctl -a | grep forward You will note that options exist for controlling forwarding per default, per interface, as well as separate options for IPv4/IPv6 per interface. Enter this command to temporarily enable packet forwarding at runtime: # sysctl net.ipv4.ip_forward=1 Edit /etc/sysctl.d/30-ipforward.conf to make the previous change persistent after a reboot for all interfaces: /etc/sysctl.d/30-ipforward.conf net.ipv4.ip_forward=1 Afterwards it is advisable to double-check forwarding is enabled as required after a reboot. Enable NAT With iptables # iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE # iptables -A FORWARD -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT # iptables -A FORWARD -i usb0 -o eth0 -j ACCEPT
ref: https://wiki.archlinux.org/index.php/Internet_Sharing
At this point, you will have ip routing, but DNS isn't setup yet. To get DNS working put your preferred name server in /etc/resolv.conf
nameserver 192.168.1.1
