http://steakwiki.com/index.php?action=history&feed=atom&title=PCBs 2026-04-16T06:24:51Z Revision history for this page on the wiki MediaWiki 1.35.1 http://steakwiki.com/index.php?title=PCBs&diff=2556&oldid=prev 2026-01-05T04:46:31Z

<p><span dir="auto"><span class="autocomment">Rivets</span></span></p> <table class="diff diff-contentalign-left diff-editfont-monospace" data-mw="interface"> <col class="diff-marker" /> <col class="diff-content" /> <col class="diff-marker" /> <col class="diff-content" /> <tr class="diff-title" lang="en"> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 04:46, 5 January 2026</td> </tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l19" >Line 19:</td> <td colspan="2" class="diff-lineno">Line 19:</td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* https://www.eevblog.com/forum/repair/rivetseyelets-for-pcb-repair/ - Places to source rivets/eyelets</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* https://www.eevblog.com/forum/repair/rivetseyelets-for-pcb-repair/ - Places to source rivets/eyelets</div></td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* https://www.eevblog.com/forum/projects/ive-never-seen-a-circuit-board-made-like-this/25/ - Page 2 of this thread, someone suggests that eyelets are prone to breaking traces due to differences between PCB and metal expansion. You may be better off using stranded wire.</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* https://www.eevblog.com/forum/projects/ive-never-seen-a-circuit-board-made-like-this/25/ - Page 2 of this thread, someone suggests that eyelets are prone to breaking traces due to differences between PCB and metal expansion. You may be better off using stranded wire.</div></td></tr> <tr><td class='diff-marker'>−</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>* https://maker-hub.georgefox.edu/w/index.php?title=Through_Hole_Press&amp;mobileaction=toggle_view_desktop - You can use a press to close the rivets.</div></td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>* https://maker-hub.georgefox.edu/w/index.php?title=Through_Hole_Press&amp;mobileaction=toggle_view_desktop - You can use a press to close the rivets<ins class="diffchange diffchange-inline">. (This makerspace also has some other interesting equipment, such as a Voltera V-One, along with other shops. It's a useful resource to review as the wiki pages of equipment are thoroughly documented with usage and safety instructions)</ins>.</div></td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>====Thermal Design====</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>====Thermal Design====</div></td></tr> <!-- diff cache key wiki:diff::1.12:old-2555:rev-2556 --> </table>

ViciousCarnivore http://steakwiki.com/index.php?title=PCBs&diff=2555&oldid=prev 2026-01-05T04:36:02Z

<p><span dir="auto"><span class="autocomment">Rivets</span></span></p> <table class="diff diff-contentalign-left diff-editfont-monospace" data-mw="interface"> <col class="diff-marker" /> <col class="diff-content" /> <col class="diff-marker" /> <col class="diff-content" /> <tr class="diff-title" lang="en"> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 04:36, 5 January 2026</td> </tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l19" >Line 19:</td> <td colspan="2" class="diff-lineno">Line 19:</td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* https://www.eevblog.com/forum/repair/rivetseyelets-for-pcb-repair/ - Places to source rivets/eyelets</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* https://www.eevblog.com/forum/repair/rivetseyelets-for-pcb-repair/ - Places to source rivets/eyelets</div></td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* https://www.eevblog.com/forum/projects/ive-never-seen-a-circuit-board-made-like-this/25/ - Page 2 of this thread, someone suggests that eyelets are prone to breaking traces due to differences between PCB and metal expansion. You may be better off using stranded wire.</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* https://www.eevblog.com/forum/projects/ive-never-seen-a-circuit-board-made-like-this/25/ - Page 2 of this thread, someone suggests that eyelets are prone to breaking traces due to differences between PCB and metal expansion. You may be better off using stranded wire.</div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">* https://maker-hub.georgefox.edu/w/index.php?title=Through_Hole_Press&amp;mobileaction=toggle_view_desktop - You can use a press to close the rivets.</ins></div></td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>====Thermal Design====</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>====Thermal Design====</div></td></tr> <!-- diff cache key wiki:diff::1.12:old-2554:rev-2555 --> </table>

ViciousCarnivore http://steakwiki.com/index.php?title=PCBs&diff=2554&oldid=prev 2026-01-05T04:33:31Z

<p><span dir="auto"><span class="autocomment">Rivets</span></span></p> <table class="diff diff-contentalign-left diff-editfont-monospace" data-mw="interface"> <col class="diff-marker" /> <col class="diff-content" /> <col class="diff-marker" /> <col class="diff-content" /> <tr class="diff-title" lang="en"> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 04:33, 5 January 2026</td> </tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l18" >Line 18:</td> <td colspan="2" class="diff-lineno">Line 18:</td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* http://fab.cba.mit.edu/classes/863.16/doc/tutorials/PCB_Rivets/ - Guide on PCB rivets, 2 size recommendations, and how to flatten one side with a punch and hammer after installing. There are many rivet guns for sale, but it's good to see that the fundamental idea of rivets needs only a hammer and a punch.</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* http://fab.cba.mit.edu/classes/863.16/doc/tutorials/PCB_Rivets/ - Guide on PCB rivets, 2 size recommendations, and how to flatten one side with a punch and hammer after installing. There are many rivet guns for sale, but it's good to see that the fundamental idea of rivets needs only a hammer and a punch.</div></td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* https://www.eevblog.com/forum/repair/rivetseyelets-for-pcb-repair/ - Places to source rivets/eyelets</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* https://www.eevblog.com/forum/repair/rivetseyelets-for-pcb-repair/ - Places to source rivets/eyelets</div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">* https://www.eevblog.com/forum/projects/ive-never-seen-a-circuit-board-made-like-this/25/ - Page 2 of this thread, someone suggests that eyelets are prone to breaking traces due to differences between PCB and metal expansion. You may be better off using stranded wire.</ins></div></td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>====Thermal Design====</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>====Thermal Design====</div></td></tr> <!-- diff cache key wiki:diff::1.12:old-2500:rev-2554 --> </table>

ViciousCarnivore http://steakwiki.com/index.php?title=PCBs&diff=2500&oldid=prev 2025-11-16T05:29:06Z

<p></p> <table class="diff diff-contentalign-left diff-editfont-monospace" data-mw="interface"> <col class="diff-marker" /> <col class="diff-content" /> <col class="diff-marker" /> <col class="diff-content" /> <tr class="diff-title" lang="en"> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 05:29, 16 November 2025</td> </tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l1" >Line 1:</td> <td colspan="2" class="diff-lineno">Line 1:</td></tr> <tr><td class='diff-marker'>−</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>PCBs. esPCB, ésePCB</div></td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>PCBs. esPCB, ésePCB<ins class="diffchange diffchange-inline">, 1632</ins></div></td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>==Tips/Techniques==</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>==Tips/Techniques==</div></td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>===List===</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>===List===</div></td></tr> <!-- diff cache key wiki:diff::1.12:old-2499:rev-2500 --> </table>

ViciousCarnivore http://steakwiki.com/index.php?title=PCBs&diff=2499&oldid=prev 2025-11-16T05:28:18Z

<p><span dir="auto"><span class="autocomment">Layout Design Tools</span></span></p> <table class="diff diff-contentalign-left diff-editfont-monospace" data-mw="interface"> <col class="diff-marker" /> <col class="diff-content" /> <col class="diff-marker" /> <col class="diff-content" /> <tr class="diff-title" lang="en"> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 05:28, 16 November 2025</td> </tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l27" >Line 27:</td> <td colspan="2" class="diff-lineno">Line 27:</td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[Software#Ansys]]</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[Software#Ansys]]</div></td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>====Layout Design Tools====</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>====Layout Design Tools====</div></td></tr> <tr><td class='diff-marker'>−</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>[[Software]]</div></td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>[[Software<ins class="diffchange diffchange-inline">#Layout_Design_Tools</ins>]]</div></td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[Category:online notes]]</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[Category:online notes]]</div></td></tr> <!-- diff cache key wiki:diff::1.12:old-2498:rev-2499 --> </table>

ViciousCarnivore http://steakwiki.com/index.php?title=PCBs&diff=2498&oldid=prev 2025-11-16T05:28:00Z

<p><span dir="auto"><span class="autocomment">Using Image Processing to detect PCB Errors</span></span></p> <table class="diff diff-contentalign-left diff-editfont-monospace" data-mw="interface"> <col class="diff-marker" /> <col class="diff-content" /> <col class="diff-marker" /> <col class="diff-content" /> <tr class="diff-title" lang="en"> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 05:28, 16 November 2025</td> </tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l26" >Line 26:</td> <td colspan="2" class="diff-lineno">Line 26:</td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>====Using Image Processing to detect PCB Errors====</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>====Using Image Processing to detect PCB Errors====</div></td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[Software#Ansys]]</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[Software#Ansys]]</div></td></tr> <tr><td class='diff-marker'>−</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div> </div></td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins class="diffchange diffchange-inline">====Layout Design Tools====</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins class="diffchange diffchange-inline">[[Software]]</ins></div></td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[Category:online notes]]</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[Category:online notes]]</div></td></tr> <!-- diff cache key wiki:diff::1.12:old-2348:rev-2498 --> </table>

ViciousCarnivore http://steakwiki.com/index.php?title=PCBs&diff=2348&oldid=prev 2025-10-22T02:45:59Z

<p><span dir="auto"><span class="autocomment">Rivets</span></span></p> <table class="diff diff-contentalign-left diff-editfont-monospace" data-mw="interface"> <col class="diff-marker" /> <col class="diff-content" /> <col class="diff-marker" /> <col class="diff-content" /> <tr class="diff-title" lang="en"> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 02:45, 22 October 2025</td> </tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l16" >Line 16:</td> <td colspan="2" class="diff-lineno">Line 16:</td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>When considering 4-mil finished holes in a PCB design, pause. Building prototypes in a specialized facility is possible, but impractical for volume production. Instead, explore HDI strategies with laser-drilled microvias to achieve density without sacrificing manufacturability or cost.&quot;&lt;/pre&gt;</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>When considering 4-mil finished holes in a PCB design, pause. Building prototypes in a specialized facility is possible, but impractical for volume production. Instead, explore HDI strategies with laser-drilled microvias to achieve density without sacrificing manufacturability or cost.&quot;&lt;/pre&gt;</div></td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>====Rivets====</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>====Rivets====</div></td></tr> <tr><td class='diff-marker'>−</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>* http://fab.cba.mit.edu/classes/863.16/doc/tutorials/PCB_Rivets/ - Guide on PCB rivets, 2 size recommendations, and how to flatten one side with a punch and hammer after installing. <del class="diffchange diffchange-inline">They sell a lot of </del>rivet guns, but it's good to see that the fundamental idea of rivets needs only a hammer and a punch.</div></td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>* http://fab.cba.mit.edu/classes/863.16/doc/tutorials/PCB_Rivets/ - Guide on PCB rivets, 2 size recommendations, and how to flatten one side with a punch and hammer after installing. <ins class="diffchange diffchange-inline">There are many </ins>rivet guns <ins class="diffchange diffchange-inline">for sale</ins>, but it's good to see that the fundamental idea of rivets needs only a hammer and a punch.</div></td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* https://www.eevblog.com/forum/repair/rivetseyelets-for-pcb-repair/ - Places to source rivets/eyelets</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* https://www.eevblog.com/forum/repair/rivetseyelets-for-pcb-repair/ - Places to source rivets/eyelets</div></td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr> <!-- diff cache key wiki:diff::1.12:old-2347:rev-2348 --> </table>

ViciousCarnivore http://steakwiki.com/index.php?title=PCBs&diff=2347&oldid=prev 2025-10-22T02:45:32Z

<p><span dir="auto"><span class="autocomment">Tips/Techniques</span></span></p> <table class="diff diff-contentalign-left diff-editfont-monospace" data-mw="interface"> <col class="diff-marker" /> <col class="diff-content" /> <col class="diff-marker" /> <col class="diff-content" /> <tr class="diff-title" lang="en"> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 02:45, 22 October 2025</td> </tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l12" >Line 12:</td> <td colspan="2" class="diff-lineno">Line 12:</td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Designing for 4 mils simply doesn’t align with what’s achievable at scale. Could we force it? Yes, by over-plating, doubling the copper thickness and dramatically slowing the line. But that’s a recipe for higher costs, longer lead times and questionable yield.</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Designing for 4 mils simply doesn’t align with what’s achievable at scale. Could we force it? Yes, by over-plating, doubling the copper thickness and dramatically slowing the line. But that’s a recipe for higher costs, longer lead times and questionable yield.</div></td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr> <tr><td class='diff-marker'>−</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>Bottom line: A 4-mil finished hole is feasible only in small prototype runs, not in cost-sensitive, high-volume production.&quot;&lt;/pre&gt;</div></td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>Bottom line: A 4-mil finished hole is feasible only in small prototype runs, not in cost-sensitive, high-volume production<ins class="diffchange diffchange-inline">.</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div> </div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins class="diffchange diffchange-inline">When considering 4-mil finished holes in a PCB design, pause. Building prototypes in a specialized facility is possible, but impractical for volume production. Instead, explore HDI strategies with laser-drilled microvias to achieve density without sacrificing manufacturability or cost</ins>.&quot;&lt;/pre&gt;</div></td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>====Rivets====</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>====Rivets====</div></td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* http://fab.cba.mit.edu/classes/863.16/doc/tutorials/PCB_Rivets/ - Guide on PCB rivets, 2 size recommendations, and how to flatten one side with a punch and hammer after installing. They sell a lot of rivet guns, but it's good to see that the fundamental idea of rivets needs only a hammer and a punch.</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* http://fab.cba.mit.edu/classes/863.16/doc/tutorials/PCB_Rivets/ - Guide on PCB rivets, 2 size recommendations, and how to flatten one side with a punch and hammer after installing. They sell a lot of rivet guns, but it's good to see that the fundamental idea of rivets needs only a hammer and a punch.</div></td></tr> <!-- diff cache key wiki:diff::1.12:old-2346:rev-2347 --> </table>

ViciousCarnivore http://steakwiki.com/index.php?title=PCBs&diff=2346&oldid=prev 2025-10-22T02:44:32Z

<p><span dir="auto"><span class="autocomment">List</span></span></p> <table class="diff diff-contentalign-left diff-editfont-monospace" data-mw="interface"> <col class="diff-marker" /> <col class="diff-content" /> <col class="diff-marker" /> <col class="diff-content" /> <tr class="diff-title" lang="en"> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 02:44, 22 October 2025</td> </tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l3" >Line 3:</td> <td colspan="2" class="diff-lineno">Line 3:</td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>===List===</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>===List===</div></td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* https://www.eevblog.com/forum/projects/ive-never-seen-a-circuit-board-made-like-this/ - a way of using solder on epoxy board for traces. Allows for iterative development but has an up front investment. Would be interesting to see this done without the cnc, but with just a hot solder pen for modifications. That might be the answer to avoiding breadboards, which I don't like, and protoboards are better but not perfect, I should try this. There was also a follow up video, named &quot;Howie did it - 3D printing a printed circuit board&quot;.  </div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* https://www.eevblog.com/forum/projects/ive-never-seen-a-circuit-board-made-like-this/ - a way of using solder on epoxy board for traces. Allows for iterative development but has an up front investment. Would be interesting to see this done without the cnc, but with just a hot solder pen for modifications. That might be the answer to avoiding breadboards, which I don't like, and protoboards are better but not perfect, I should try this. There was also a follow up video, named &quot;Howie did it - 3D printing a printed circuit board&quot;.  </div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">* https://pcdandf.com/pcdesign/index.php/current-issue/293-board-talk/18918-minimum-finished-hole-size-and-how-it-impacts-manufacturability -</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">&lt;pre&gt; &quot;Not long ago, a customer sent us an 8-layer rigid PCB design for quotation. On the surface, nothing unusual – until we noticed the minimum finished hole size (FHS) was 4 mils. That number might not sound alarming, but in PCB manufacturing, 4 mils is a red flag. Here’s why.</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;"></ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">The issue arises when fabricators drill a plated through-hole (PTH) and deposit copper during plating. The remaining diameter after this process becomes the finished hole size. A 4-mil FHS with a tolerance of ±4 mils technically ranges from 0 to 8 mils. That kind of spread becomes nearly impossible to maintain in volume production.</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;"></ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">To make a PTH, fabricators start with a larger drill size and plate copper along the walls. The smaller the drill, the shorter its flute length – and the fewer panels manufacturers can drill in a stack. Large-scale factories typically drill 10–20 panels at a time for efficiency, but a tiny drill bit can’t survive that workload, which drives up cost and limits throughput. In practice, the smallest common drill diameters used in offshore volume production sit around 8 mils (0.2 mm). After plating (about 1 mil per side for IPC Class 3), that leaves a finished hole closer to 6 mils.</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;"></ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">Designing for 4 mils simply doesn’t align with what’s achievable at scale. Could we force it? Yes, by over-plating, doubling the copper thickness and dramatically slowing the line. But that’s a recipe for higher costs, longer lead times and questionable yield.</ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;"></ins></div></td></tr> <tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">Bottom line: A 4-mil finished hole is feasible only in small prototype runs, not in cost-sensitive, high-volume production.&quot;&lt;/pre&gt;</ins></div></td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>====Rivets====</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>====Rivets====</div></td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* http://fab.cba.mit.edu/classes/863.16/doc/tutorials/PCB_Rivets/ - Guide on PCB rivets, 2 size recommendations, and how to flatten one side with a punch and hammer after installing. They sell a lot of rivet guns, but it's good to see that the fundamental idea of rivets needs only a hammer and a punch.</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* http://fab.cba.mit.edu/classes/863.16/doc/tutorials/PCB_Rivets/ - Guide on PCB rivets, 2 size recommendations, and how to flatten one side with a punch and hammer after installing. They sell a lot of rivet guns, but it's good to see that the fundamental idea of rivets needs only a hammer and a punch.</div></td></tr> <!-- diff cache key wiki:diff::1.12:old-1783:rev-2346 --> </table>

ViciousCarnivore http://steakwiki.com/index.php?title=PCBs&diff=1783&oldid=prev 2025-01-17T21:38:38Z

<p><span dir="auto"><span class="autocomment">Thermal Design</span></span></p> <table class="diff diff-contentalign-left diff-editfont-monospace" data-mw="interface"> <col class="diff-marker" /> <col class="diff-content" /> <col class="diff-marker" /> <col class="diff-content" /> <tr class="diff-title" lang="en"> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 21:38, 17 January 2025</td> </tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l10" >Line 10:</td> <td colspan="2" class="diff-lineno">Line 10:</td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* https://www.ti.com/lit/an/snva419c/snva419c.pdf - Copper thickness and power dissipation.</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* https://www.ti.com/lit/an/snva419c/snva419c.pdf - Copper thickness and power dissipation.</div></td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* https://www.eevblog.com/forum/manufacture/need-help-desciphering-layout-specs/ - reference for TI data sheet.</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* https://www.eevblog.com/forum/manufacture/need-help-desciphering-layout-specs/ - reference for TI data sheet.</div></td></tr> <tr><td class='diff-marker'>−</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>See also [[Software]]</div></td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>See also [[Software<ins class="diffchange diffchange-inline">#Simulations</ins>]]</div></td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr> <tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>====Using Image Processing to detect PCB Errors====</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>====Using Image Processing to detect PCB Errors====</div></td></tr> <!-- diff cache key wiki:diff::1.12:old-1782:rev-1783 --> </table>

ViciousCarnivore